|
Key
Specifications/Special Features:
EX9543
is a Fast Ethernet 100 Base-TX to Fiber 100 Base-FX converter.
It
features one fiber port with SC, ST, MT-RJ or VF-45 connector
and one twisted pair port with RJ-45 connector. It
converts electrical signal from 100 Base-TX side into optical
signal at 100 Base-FX side and vice versa.
Support
Fast Ethernet 100Base-TX and 100 Base-FX
Multiple
choices for fiber connectors: SC / ST / MT-RJ / VF-45 for
multi-mode and single-mode
Standalone
or composite applications
100Mbps auto-duplex-negotiation
100Mbps
for half-duplex mode
200Mbps
for full-duplex mode
Technical
Specification:
Standards:
IEEE802.3u 100 Base-TX/FX
Models:
|
Model
|
Connector
Type
|
|
EX9543
ST/SC
|
RJ-45
<-> ST/SC 1310nm
|
|
EX9543
VF
|
RJ-45
<-> VF-45 1310nm
|
|
EX9543
MT
|
RJ-45
<-> MT-RJ 1310nm
|
|
The 100
Mbps 1300nm Fiber Transceivers:
|
|
ST/SC
multi-mode 2Km
|
Default
|
|
SC.S20/S40/S60/S80/S100Km
single-mode
|
＊Optional
|
|
VF-45
multi-mode, single-mode
|
＊＊Optional
|
|
MR-RJ
multi-mode, single-mode 15Km
|
＊＊Optional
|
＊:
SC single-mode S20/S40/S60/S80/S100 Km are optional
＊＊:
VF-45, MT-RJ are available on request only
UTP
Cable: Cat. 5 cable up to 100m
◎Fiber
Cable: 50/125,
62.5/125, or 100/140µm
multi-mode
80/125, 8.7/125,
9/125 or 10/125µm
single-mode
◎Data
Transfer Rate:
100Mbps
auto-duplex-negotiation
100Mbps for
half-duplex mode
200Mbps for full-duplex mode
◎LED
Indicators: FX Tx, Link, TX Tx,
Link, FDX, POWER
◎Power
Requirement: 1A
@ +5V (from MII Connector)
◎Ambient
Temperature: 0o to 50oC
◎Humidity:
5% to 90%
|
Driver
Pin
Assignment
Block
Diagram;){kind=link}